11. 关键概念 / KEY CONCEPTS
对应 PDF 第 29–31 页
快速键 / QUICK KEYS
Organizing your Quick Keys will be part of the planning. You will have to figure out which quick keys to assign to your Favorites Lists, Systems, and Departments so you can scan them without a table of contents and with some sort of logic you can remember. Remember, enabling/disabling quick keys is not the same thing as Avoiding or Unavoiding Systems/Department and Monitor On/Off Favorites Lists.
合理规划快速键是使用本机的关键功课：为收藏列表、系统、部门分配有逻辑、好记的快速键，即可不查菜单直接开关扫描对象。 注意：开关快速键 ≠ 回避/取消回避系统部门，也 ≠ 收藏列表的监测开/关。
| 类型 / Type | 英文原文（EN） | 中文译文（CN） |
|---|---|---|
| 收藏列表快速键 FLQK | Favorites Lists Quick Keys are used to enable or disable Favorites Lists for scanning. They are just the number keys on the scanner but once assigned to a Favorites List they become the Quick Keys. Your Favorites Lists hold your Systems that also may have System quick keys assigned to those Systems. You cannot assign a Quick Key in one Favorites List to another Favorites List. Selecting a Favorites List will enable all (Unavoided) Systems in that list for scanning. There are 100 Quick Keys (0-99) to use for your Favorites Lists. Favorites List Quick Keys can only be assigned once to any one Favorites List. If you don't assign a Quick Key to a list, it will always be enabled. | 用于开关收藏列表是否参与扫描。快 速键就是数字键 0–99，共 100 个； 一个快速键只能分配给一个收藏列 表。选中某收藏列表即启用其中所有 （未回避）系统。若某列表不分配快 速键，它将永远被扫描。 |
| 系统快速键 SQK | System Quick Keys are used to enable or disable conventional and trunking systems for scanning. You can assign any quick key to one or more Systems, or program one or more systems with no quick key assigned that will always be scanned unless you Avoid it. There are also 100 Quick Keys (0-99) to use for your Systems. | 开关常规/集群系统是否参与扫描。一 个快速键可分配给多个系统；未分配 快速键的系统除非被回避，否则始终 被扫描。 |
| 部门快速键 DQK | Department Quick Keys enable or disable conventional and trunking systems for scanning. You can assign any quick key to one or more Departments, or program one or more Departments with no quick key assigned so that these Departments will always be scanned unless you Avoid it. There are also 100 Quick Keys (0-99) to use for your Departments. It is best to assign Quick Keys to everything to easily access your Favorites List and System/Department. | 开关部门是否参与扫描，规则同系统 快速键。建议给所有对象都分配快速 键，便于快速访问。 |
| 搜索键 Search Keys | You can assign any Search Keys (1, 2, or 3) to any Custom Search range, Tone-Out Search, or Close Call Only Search for quick access to your favorite searches. | 可将数字键 1/2/3 指定为自定义搜 索、Tone-Out 搜索或 Close Call Only 搜索的一键启动。 |
规划 Profile 与开机键 / PLANNING PROFILES & STARTUP KEYS
You can program each of your Favorites Lists with a Startup Key (0-9) so that when you power up the scanner and press the key number, just those Favorites List(s) assigned to the key will be enabled for scan. Systems are not affected.
可为每个收藏列表分配开机键（0–9）：开机时按住某数字键，仅启用分配到该键的收藏列表；系统设置不受影响。
数字标签 / NUMBER TAGS
Numbers tags will allow you to tag each Favorites Lists, System, and Channel to locate easier. Number tags can range from 0 to 99 for Favorites Lists and Systems and 0-999 for Channels. You can assign number tags to channels even if the Favorites List does not have a number tag but, without a Favorites List number tag, you can only navigate to these channels while holding or scanning in that Favorites List. See also Using Number Tags.
数字标签用于快速定位：收藏列表与系统 0–99，频道 0–999。即使收藏列表没有标签，也能给其频道分配标签，但只有在该列表内保持/扫描时才能跳转。
警报 / ALERTS
You can program your scanner to alert you when, a Channel or Unit ID is received, you receive a Close Call hit, an ID is transmitted with an Emergency Alert or you receive a Tone-out hit. For each alert in the scanner, you can select from 9 different tone patterns, 15 volume settings, 7 colors, and 3 color patterns.
可在收到频道/单元 ID、CC 命中、紧急 ID 或 Tone-Out 命中时触发警报。每种警报可配置：9 种音调、15
级音量、7 种 LED 颜色、3 种闪烁模式。