24. 搜索功能 / SEARCH FUNCTIONS

对应 PDF 第 62–65 页

编辑自定义搜索 / EDIT CUSTOM SEARCH

You can edit the 10 Custom Search ranges. The default custom search range names appear as Custom 1, Custom 2, and so on. Custom 0-9 – Select for each Custom Search. Edit Name – See Data Naming. Edit Srch Limit – Set Lower Limit / Set Upper Limit. Set Delay Time – -10, -5, 0, 1, 2, 3, 4, 5, 10, or 30 sec. Set Modulation – Auto, AM, NFM, FM, WFM, or FMB (Broadcast). Set Attenuator – On or Off. Set Step – Auto, 5, 6.25, 7.5, 8.33, 10, 12.5, 15, 20, 25, 50, or 100 kHz. Set Audio AGC – Analog / Digital (On or Off). Digital Waiting Time – 0 to 1000 ms. Digital Threshold Mode – Auto, Manual, Default. Digital Threshold Level – 5 to 13. Search with Scan – See also Select Lists to Monitor and Search with Scan. Set Avoid – Stop Avoiding, Temporary Avoid, or Permanent Avoid. Set Hold Time – Sets how long to search when scanning. Enter the hold time (0-255 sec.) and press E/yes to save.

自定义搜索共 10 段（Custom 0–9，默认名 Custom 1、2…），每段可设置：名称、上下限频率、延迟时间（-10～30 秒）、调制（Auto/AM/NFM/FM/WFM/FMB）、衰减、步进（5–100 kHz）、音频 AGC、 数字等待时间（0–1000ms）、数字阈值模式/电平、Search with Scan（随扫搜索）开关、回避状态、驻

留时间（0–255 秒，随扫搜索时的停留时长）。

设置搜索键 / SET SEARCH KEY

The scanner has three search keys that you can assign to a search range. The search keys are number keys 1, 2, and 3. This allows you to start a Custom, Tone-Out, or Close Call Search without having to go into the menus.

Search Key 1-3 – Select a search for each Search Key. . (nothing assigned), Custom Search 0-9, Tone-Out, or Close Call.

数字键 1 / 2 / 3 可作为搜索键，分别绑定：无 / 自定义搜索 0–9 / Tone-Out / Close Call。绑定后即可在保持状态下按 Func + 1/2/3 一键启动。

随扫搜索 / SEARCH WITH SCAN

快速搜索 / QUICK SEARCH

To Start a Quick Search from the Displayed Frequency: Press Channel to hold on the channel or frequency.

Press Func then E/yes. At Quick Search? Press E/yes. Press Channel again to release hold mode and start searching. To Start a Quick Search from a New Frequency: Press Channel to hold on any channel or frequency.

Enter the new frequency then press Channel to set the new starting frequency. Press Channel again to release hold mode and start searching.

从当前频率起搜： Channel 保持 → Func + E/yes → 提示 "Quick Search?" 按 E/yes → 再按 Channel 释放保持开始搜索。从新频率起搜： Channel 保持 → 输入新频率 → Channel 设为起始频率 → 再按 Channel 开始搜索。

自定义搜索操作 / CUSTOM SEARCH OPERATIONS

Allows you to search the scanners 10 programmed frequency ranges. Press Menu. Scroll to Search for... and press E/yes. Scroll to Custom Search and press E/yes. Change Direction or Resume Search – Turn the Scroll Control. Select Custom Search Bands – Press the number keys to enable or disable each Custom Search band.

搜索 10 段已编程频率范围。路径：Menu → Search for... → Custom Search。改变方向/恢复搜索：转动滚轮。选择启用的搜索段：按数字键 0–9 切换各段开/关。

操作 / Action	英文原文（EN）	中文译文（CN）
频率保持 Frequency Hold	Press Channel to hold on a Frequency. Scroll to frequencies. Press Channel to release hold.	Channel 保持频率，滚动切换，再 按 Channel 解除。
回避频率 Avoiding Frequencies	Temporary Avoids cancel when you cycle power. Frequency Avoid – Press Avoid once to Temporary Avoid. Press quickly to toggle Permanent Avoid and Stop Avoiding when the scanner stays in a frequency or in Search Hold mode. Review Avoids – Press Channel to hold on any Frequency, press Func then Avoid, scroll to each frequency and press E/yes to Stop Avoiding. Stop All Avoiding – Press Channel to hold on any Frequency, press and hold Avoid. The scanner displays Search Frequencies All Unavoided.	Avoid 一次=临时回避（重启失 效）；搜索保持中快速连按=在永久 回避/解除间切换。查看回避：保持频 率后 Func + Avoid 逐个解除。全 部解除：保持频率后长按 Avoid （屏幕提示 "Search Frequencies All Unavoided"）。

频段衰减 Band Attenuation	Press Func then 4(<ATT) for each band. Global Attenuation – Press Channel to hold on any frequency then press and hold Func then 4(<ATT) to toggle global attenuation.	逐频段衰减： Func + 4 ；全局衰 减：保持频率后 Func +长按 4 。
调制 Modulation	Press Func then Channel(MOD) for each band.	逐频段切换调制： Func + Channel 。
直接输入频率	Press Channel to hold on any frequency. Enter the frequency and press Channel. Press Channel to release hold.	保持后输入频率，按 Channel 设起 始频率并继续。
中频交换 IFX	Press Channel to hold on any frequency. Press Func then 7(IFX) to toggle on or off.	保持频率后 Func + 7 开关 IFX。
中继频率 REV	Press Channel to hold on any frequency. Press Func then press and hold 8(REV).	保持频率后 Func +长按 8 上下行 切换。
回放/录音 Replay / Record	While searching, press Replay. Press Channel to pause/resume replay. Turn the Scroll Control to select recordings. Start/Stop Recording – press Func then Replay. Note: Resets to Off when you turn off the scanner.	搜索中 Replay 回放、 Func + Replay 录音（关机后录音复位为 关）。
存储频率 Storing Frequencies	Displayed Frequency into a Quick Save Department – Press E/yes. You will see Quick Frequency Save in the display then press E/yes. The scanner stores the frequency into the Quick Save Department in the Quick Save System. Displayed Frequency into an Existing Department – Press E/yes. You will see Saving to Quick Dept in the display then press ./no. At Saving Channel to scroll to the Favorites List and press E/yes. At Select System scroll to the System and press E/yes. At Select Department scroll to the Department and press E/yes. After storing the frequency, you will be at the Edit Channel menu to complete the settings for the new channel. If you don't want to edit the channel settings or are done editing the channel, press Avoid to return to searching.	存为快速保存（Quick Save）：显 示 "Quick Frequency Save" 时按 E/yes ，频率存入 Quick Save System 的 Quick Save Department。存入指定部门：按 E/yes 后按 ./no ，依次选择收藏 列表→系统→部门；存完进入频道编 辑菜单完善设置，按 Avoid 返回搜 索。
搜索菜单	Press Func then Menu.	快速打开搜索菜单： Func + Menu 。