Indicates the first digit of the Favorites List
quick key on the left with the blinking second
digit on the right in Scan mode. A non-blinking
number on the right indicates the quick key is
enabled waiting to be scanned. A - (dash)
means nothing is assign to the quick key. An *
(asterisk) means the quick key is disabled.
Displays in Site Hold mode. / Displays in
Search mode.
站点保持模式 / 搜索模式指示。
Time / Date
Displays the time. / Displays the date.
显示时间 / 日期。
↑ / ↓
Displays to show the Scan or Search direction.
扫描/搜索方向指示。
GPS
Displays when connected to a GPS unit.
已连接 GPS。
REC
Displays when recording.
录音中。
信号强度条
Displays to show the signal strength.
信号强度指示。
PRI
Displays in Priority mode. Displays in reverse
in Priority DND mode.
优先模式；反白=优先勿扰模式。
电池图标
Displays and blinks if the battery is low.
电量低时闪烁。
CC 图标
Displays if the Close Call Priority feature is on.
Displays in reverse in Close Call DND mode.
Close Call 优先开启；反白=CC 勿扰
模式。
S=NN
Displays the squelch level for three seconds
when you turn SQ.
调节静噪时显示 3 秒静噪等级。
Battery Level
Displays when you press Scroll Control knob.
按下滚轮旋钮时显示电压。
S0-9
Display the first digit of the current System
quick key on the left with the blinking second
digit on the right. A non-blinking number on
the right indicates the quick key is enabled
waiting to be scanned. A - (dash) means
nothing is assigned to the quick key. An *
(asterisk) means the quick key is disabled. 0-9
displays the Custom Search key status in
Search mode.
当前系统快速键（左首位+右闪烁
位）；"-"未分配、"*"禁用。搜索模
式显示自定义搜索键状态。
D0-9
When you press Func, the screen displays the
first digit of the current Department quick key
on the left with the blinking second digit on the
right. • A non-blinking number on the right
indicates the quick key is enabled, waiting to be
scanned. • A - (dash) means that nothing is
assigned to the quick key. • An * (asterisk)
means the quick key is disabled.
按 Func 时显示当前部门快速键
（规则同上）。
Receive Mode
Receive mode in Function mode.
功能模式下显示接收模式。
Volume Offset
Volume Offset for the channel in Function
mode.
功能模式下显示频道音量偏移。
IFX
Displays if Intermediate Exchange is enabled
for the channel.
该频道已启用中频切换。
ATT
Displays to show channel attenuation in
Receiving/Hold modes and in Search mode to
show search attenuation. ATT blinks to indicate
global attenuation.
频道/搜索衰减开启；ATT 闪烁=全局
衰减。
P25
Displays if the channel is receiving digitalized
voice in Receiving or Hold modes.
正在接收 P25 数字化语音。
LNK
Displays when data is received on a voice
channel in Receiving or Hold modes.
话音信道上收到数据（链路）。
DAT
Displays when data is received on a control
channel in Receiving or Hold modes.
控制信道上收到数据。
ENC
Displays if the channel is receiving encrypted
voice and is muted in Receiving or Hold modes.
收到加密语音（已静音）。
PT0/PT1
Phase 2 voice and slot information.
P25 Phase 2 语音及时隙信息。
PX0/PX1
X2-TDMA voice and slot information.
X2-TDMA 语音及时隙信息。
PRV
This icon shows the receiving digitized voice of
EDACS ProVoice. Then, this shows in the same
place as "P25".
EDACS ProVoice 数字化语音（显示
在 P25 图标位置）。
CAP
Capacity Plus/Linked Capacity Plus site voice
and data in MOTOTRBO system.
MOTOTRBO Cap+ / Linked Cap+
站点语音与数据（欧版 DMR 独
有）。
CON
Connect Plus site voice and data in
MOTOTRBO system.
MOTOTRBO Connect Plus 站点语
音与数据（欧版独有）。
DT3
Trunked DMR site voice and data in ETSI
Standard Tier 3 system.
ETSI DMR Tier III 集群站点语音与数
据（欧版独有）。
DMR
One Frequency DMR site voice and
data/Simplex DMR voice.
单频 DMR 站点语音/直频 DMR 语音
（欧版独有）。
XPT
Hytera XPT site voice and data in MotoTRBO
system. These show in the same place as "P25"
icon, and also in conventional/search mode.